Encapsulated Calcium Sulphate Bare Floor
Panel Available Size：500*500*26mm, 600*600*30mm , 610*610*30mm
Specifications：
Panel size: 600×600×30mm
Limit deviation of plate width: 0 ~±0.3 mm
Limit deviation of plate thickness: 0 ~ ±0.3 mm
Surface flatness: ≤0.5mm
Verticality of adjacent edges: ≤0.3mm
Introduction
Our calcium sulfate raised floor offers easy installation and precise sizing for seamless interchangeability. With convenient wire routing and multiple outlet box options, it optimizes wiring design for offices and computer rooms. It boasts excellent fire resistance (non-combustible A1f1 grade), impressive sound insulation (air sound insulation 39dB), high load-bearing capacity, and exceptional flatness.
Technical Data
- Tab1
| Calcium Sulphate Raised Floor Type | Grade | Panel size (Thickness) |
Concentrated Load | Rolling Load | Ultimated Load |
Uniform Load | |
| Encapsulated Bare Floor | EC1000 | 600×600×28mm | ≥4550N | ≥454 kg | ≥3560 | ≥13350 | ≥23000 |
| EC1250 | 600×600×30mm | ≥5560N | ≥567 kg | ≥4450 | ≥16680 | ≥33000 | |
| Anti-static Laminated Floor | P-EC1000 | 600×600×30mm | ≥4550N | ≥454 kg | ≥3560 | ≥13350 | ≥23000 |
| P-EC1250 | 600×600×32mm | ≥5560N | ≥567 kg | ≥4450 | ≥16680 | ≥33000 | |
Calcium Sulphate Raised Floor Structure Diagram
Combination of encapsulated calcium sulphate floor
The calcium sulphate core is covered with high-quality galvanized sheets on the top and bottom surfaces, and four sides are stamped and riveted with galvanized sheets. The core board thickness normally has 28mm, 25mm, and 30mm. The available choices of galvanized steel sheets have 0.3mm, 0.35mm, 0.4mm, and 0.5mm.
Side view of Calcium sulphate floor
Riveted edge
Installation strucrure
The floor is installed on the pedestal head and then fixed with screws.
Applicable Area for Calcium Sulphate Raised Floor
Related Products (8)
Achieve high strength
Permanent flatness
Interchangeable floors, superior sealing
Excellent moisture resistance
Sound insulation
You can use wet mop or dry mop for regular cleaning, but avoid using a lot of water to prevent the floor from getting damp.
When the floor is greasy or stained, you can use a neutral detergent to clean it, but do not use acidic or alkaline detergents to avoid corrosive effects on the floor.
The anti-static performance of calcium sulfate flooring may be reduced due to factors such as usage time and environment. If this happens, you can use a special anti-static coating for treatment, or use a special anti-static floor coating for processing to restore the anti-static effect of the floor.